A-c) afm height images (2 × 2 µm), b-d) afm phase images (2 × 2 µm Afm really going above and beyond : r/ontariograde12s Experiment of section 4.3.2: stable afm configurations computed using
Fig. S3 a) Height and b) phase AFM images (scan size 2 x 2 m) of PM6
The afm-2d characterization results and gray level images of base
(a and b) 2d afm images of growth steps on the (012) surface of the cs
Afm map of the 6 a ˚ (a), 16 a ˚ (b), and 50 a ˚ (c) of 6t grown on theAfm phase (left) and height (right) images of the same area of a 60/40 Afm images with 6 μm scan length of the surfaces of the (a) controlDifference between afm and stm.
Afm images for samples produced with 30 s (a), 120 s (b), 6 × 30 s (cAfm formed ph defl pits -afm images of two samples grown under slightly different conditions onComparison of afm and other imaging and analysis protocols..
Afm images taken before (control; time=0) and after acute exposure of
Schematic picture of the used afm measurement principle.A) tapping-mode afm height images (2 × 2 µm) for pm6, y6-bo without cn 2d afm images of an aged as-deposit (iii) sample shown in (a) and (dAfm image of sample 6_3 (al 2 o 3 ) x (b 2 o 3 ) 1-x layer without si.
(a) afm topographic image of [bm 2 im][pf 6 ] – pmma fi lm. (b) heightHow to disable afm without a tune? – rx mechanic Afm image for 0, 5, and 24 h at 150 °c of (a) pm6:bttt-2cl and (bAfm images at the end of the process for l = 2.0 µm and g equal to (a.
Afm (2-d) morphology study after 10 min stripping time with applied prc
Role of the defects. a) afm topography of two chains containing 6 (n6Afm images of (a) 0.05, (b) 0.1, (c) 0.2, and (d) 0.4 wt % apo after 9 Afm images of 0# (a), 2# (b), 5# (c), 8# (d), 11# (e), and 14# (f(a) close-up afm phase images (image size = 2 × 2 μm 2 ) corresponding.
Afm images (a) 7 days control (b) 7 days sd (c) 7 days ld (d-fResults of afm measurements performed at 2 sites on each sample Afm height (a-d) and phase (e-h) images of spin coated pm6:y6:pc 70 bm(a), (b) afm images in height mode of dissolution features on the basal.
A set of time-lapsed afm phase images taken consecutively on the same
Afm images (5 × 5 μm 2 ) of the as-grown [(a) and (b)] and annealed .
.
